System
Airflow natural convection
Operating Temp. Range
Room temp.+5~80℃
GB Standard Temperature fluctuation
±0.5℃(at 37℃)
Temp. Uniformity
±1.5℃ (at 37℃)
JTM Standard Temp. Adjustment Accuracy
±0.2℃(at 37℃)
Temp. Distribution Accuracy
±1.0℃(at 37℃)
Interior Material
Stainless steel plate
Exterior Material
Cold rolled steel plate with chemical proofing coating
Insulating Material
Glass fiber
Heater
Nichrome heating wire 2.2KW
Exhaust Vent
I.D. 30mm×2 (one at the right and one at the left)
Controllers Temp. control Method
PID control
Temperature Setting Method
Use special function menu keys and up/down keys to realize digital setting
Timer
1 min ~ 99 h 59 min and 100~999 h 50 min (including Timer waiting function)
Operation Functions
Fixed temp. operation, auto start, auto stop, program operation
Program Mode
Program operation 3 segments 30 steps (30 steps×1, 15 steps×2, 10 steps×3)
Additional Functions
Deviation correction, key lock, power outage compensation
Sensors
Temperature regulatorPt thermal resistor, for overheat protection K-type thermocouple
Safety Device Self-diagnostic function (temperature sensor anomaly, SSR short circuit, Heater
disconnection, automatic overheat prevention), key lock function, overheat prevention device, overcurrent leakage protection switch
Internal Dimensions(W×D×H mm)
1070×530×1000
External Dimensions (width x depth x height mm)
1180×655×1619
Accessories
Stainless punching mesh plate 8 pcs, Supports 16 pcs