System
Forced convection and ventilation
Operating temperature range
Room temp.+10~360℃
Temp. fluctuation
±0.3℃ (at 360℃)
Temp. deviation
±2℃ (at 100℃), ±3℃ (at 200℃), ±4℃ (at 300℃), ±5℃ (at 360℃)
Temp. adjustment accuracy
±0.2℃ (at 360℃)
Temp. distribution accuracy
±3.0℃ (at 360℃)
Max. temp. reaching time
Approx. 80 min (to 360℃)
Interior material
Stainless steel plate
Exterior material
Cold rolled steel plate with chemical proofing coating
Insulating material
Rock wool+centrifugal glass wool
Heater
Stainless steel heating tubes with fins
Fan blade/motor
Axial fan blades, motor 20W×1
Cable port
I.D. 30 mm, located at the back
Other additional mechanisms
Relief safety door (explosion port), exhaust vent (manual)
Temp. control method
3-stage PID
Temp. setting method
Digital setting through special function menu keys and up/down keys
Setting temp. display
Red 4-digit LED digital display
Timer
1 min~99 h 59 min and 100~999 h 50 min (including timer waiting function)
Operation functions
Fixed temp. operation, auto start, auto stop, program operation
Program mode
Program operation 6 modes with a total of 90 segments (30 segments×1, 15 segments×2, 10 segments×3)
Heater
circuit control SSR drive
Sensors
K thermocouple (temp. controller and overheating protector)
Safety device
Self-diagnostic circuit (temperature sensor anomaly, heater disconnection protection, automatic overheating preventer, SSR short-circuit),
Internal dimensions (W×D×H mm)
600×600×600
External dimensions (W×D×H mm)
1200×780×1400
Shelf layers / shelf support spacing
9 layers/60mm
Power Source
AC220V 17.5A
Accessories
Shelf Stainless steel wire mesh plate 3 pcs, Supports 6 pcs